14-Gauge Marine-Grade Inline Fuse Holder Kit with 15A Fuses - 4 Pack

14-Gauge Marine-Grade Inline Fuse Holder Kit with 15A Fuses - 4 Pack14 Gauge Marine Grade Inline Fuse Holder Kit with 15A Fuses Key Features Marine Grade Tinned Copper: Constructed with high quality 14 AWG tinned copper wire, offering superior conductivity while effectively resisting oxidation and corrosion in harsh marine or automotive environments. Weatherproof & Dustproof: Features a tight fitting, flexible silicone rubber cap that securely seals the fuse housing, protecting the electrical connection from water

14-Gauge Marine-Grade Inline Fuse Holder Kit with 15A Fuses

Key Features

• Marine-Grade Tinned Copper: Constructed with high-quality 14 AWG tinned copper wire, offering superior conductivity while effectively resisting oxidation and corrosion in harsh marine or automotive environments.
• Weatherproof & Dustproof: Features a tight-fitting, flexible silicone rubber cap that securely seals the fuse housing, protecting the electrical connection from water splashes, dirt, dust, and salt spray.
• Universal Blade Fuse Fitment: Designed to securely hold standard ATO/ATC blade fuses. The snug internal brass contacts prevent the fuse from vibrating loose during rough off-road or marine travel.
• Customizable Pigtail Loop: Arrives as a continuous 12-inch wire loop that can be cut at any point to create the exact lead lengths needed for your specific custom wiring project.

Product Specifications

• Wire Gauge: 14 AWG (American Wire Gauge).
• Wire Material: Tinned Copper (Marine/Automotive spec).
• Fuse Type: Standard size ATO / ATC blade fuses.
• Included Fuses: Four (4) 15-Amp fuses.
• Maximum Voltage: 32V DC.

Compatibility & Applications

This universal inline fuse holder is essential for safely adding aftermarket 12V electrical accessories. Common applications include:

• Marine & Boating: Bilge pumps, marine radios, navigation lights, and fish finders.
• Automotive & Off-Road: LED light bars, fog lights, auxiliary horns, and aftermarket stereos.
• Powersports: Motorcycles, ATVs, UTVs, and snowmobiles.
• Recreational Vehicles: RV 12V lighting, solar panel feeds, and power inverters.

When to Use or Upgrade

• Adding New Accessories: Never wire an aftermarket electrical device directly to a battery without an inline fuse. This holder protects your vehicle from catastrophic electrical fires if the new accessory shorts out.
• Corroded Fuse Blocks: If an original factory fuse block slot has melted or severely corroded, an inline fuse holder can be spliced in to bypass the damaged section safely.
• Upgrading to Marine Spec: If you are using standard bare-copper wiring on a boat, upgrading to tinned copper prevents the wire from turning green and brittle from salt air exposure.

Installation & Wiring Tips

• Safety First (CRITICAL): Always disconnect the negative terminal of your battery before performing any electrical wiring to prevent accidental shorts and sparks.
• Cutting the Loop (PRO TIP): You do not have to cut the wire exactly in the middle. If your installation requires a longer wire on the battery side and a shorter wire on the accessory side, cut the loop off-center to fit your needs.
• Secure the Splice: Because this is designed for wet or harsh environments, do not use basic electrical tape. Use waterproof, adhesive-lined heat shrink butt connectors to splice the 14-gauge wire into your circuit.
• Seal the Cap: After inserting the 15A fuse, press the rubber cap down firmly until you feel it seat fully over the lip of the housing to guarantee a watertight seal.