Pickup Coil for Kawasaki 59026-1066 Vulcan 500 Ninja 500 87-96 LTD 454 85-90

Pickup Coil for Kawasaki 59026-1066 Vulcan 500 Ninja 500 87-96 LTD 454 85-90Pick up Pulsar Pulse Sensor Fit For Kawasaki Twin EN 400 Vulcan 450 500 EX GPz 400 500 1987 1996 Features: Brand new pickup pulsar coil for you to repair your stator. Direct replacement to your original unit. Plug and play, direct fit, easy installation. Often unavailable from the OEM manufacturer. All products shipped are tested. Specifications: Condition: Aftermarket 100% Brand New Quanity: 1PC Type: Pick up pulsar coil Dimensions: Height: 19mm

Pick-up Pulsar / Pulse Sensor Fit For Kawasaki Twin EN 400 Vulcan 450 500 EX GPz 400 500 1987-1996

Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.

Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil

Dimensions:
Height: 19mm
Length: 25.9mm
Width: 20mm
Bracket center to center: 50mm

Other Specifications:
Number of wires: 4
Number of plugs: 1
Number of pick-up coil: 2

Replacement Part Number:
59026-1066

Fitments:
Fit for Kawasaki EN400 EN400 Twin 1989
Fit for Kawasaki EN400 Vulcan 400 1990-1993
Fit for Kawasaki EN450 Vulcan 454LTD 1985-1990
Fit for Kawasaki EN500 Vulcan 500 A1-A6 1990-1996
Fit for Kawasaki EX400 GPZ400S 1988-1990
Fit for Kawasaki EX500 Ninja 1987-1993
Fit for Kawasaki EX500 GPZ500S 1988-1993
Fit for Kawasaki EX500 GPZ500 1987-1993

Package Included:
1x Pick up pulsar coil

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)

NOTE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.