SKU: 17809246120

GUSTARD P26 Pre-Amplifier

Sale price$37350.00 Regular price$41500.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

GUSTARD P26 Pre-AmplifierDescription Because the DIP8 had been discontinued, the new batch LME49860 was changed to SO 8 version with op amp socket. ***The P26 preamp uses the new remote control, please press and hold the AMP button for more than 3 seconds to enter the P26 preamp operation mode. Class A fully balanced design, the left and right channels are divided into regions, and the left and right separation is good; Native full balance architecture, from input to volume

Description

Because the DIP8 had been discontinued, the new batch LME49860 was changed to SO-8 version with op-amp socket.

***The P26 preamp uses the new remote control, please press and hold the AMP button for more than 3 seconds to enter the P26 preamp operation mode.

• Class A fully balanced design, the left and right channels are divided into regions, and the left and right separation is good;

• Native full balance architecture, from input to volume control to amplifier circuit, without any conversion, complete four-way architecture;

• Op amp + discrete hybrid architecture, which ensures circuit consistency and no lack of adjustability. Two in-line LM49860 dual op amps can be replaced to increase playability

• Discrete diamond-shaped differential output stage to easily drive various back-end loads;

• The volume of matrix relay is used to effectively ensure that the volume of 4 channels is consistent and unbiased;

• Adjustable input stage gain and output stage gain, easy to match different front and rear ends;

• It is with swappable opamps;

• Large OLED display + full-featured remote control operation, user-friendly design;

• Customized 50W audio dedicated toroidal transformer;

• All-aluminum alloy case, available in all silver and all black colors;

Gustard P26 real shot:
Rigorous design, reasonable layout, nice workmanship and solid materials

 



Discrete diamond-shaped differential output stage to easily drive various back-end loads



Op amp + discrete hybrid architecture, which ensures circuit consistency and no lack of adjustability,Two in-line LM49860 dual op amps can be replaced to increase playability



Use matrix relay volume to effectively ensure the consistent and unbiased volume of 4 channels



Machine soft control and volume control



High-speed low-noise rectification, multi-stage filtering



Low noise and high current discrete voltage regulator



Custom 50W Audio Toroidal Transformer



Frequency response



THD+N



Left and right channel crosstalk



Signal to noise ratio

Speficiations

Analog input (3 groups):
 
RCA: input impedance 47k input sensitivity 2 ~ 10V rms

XLR1 & XLR 2: input impedance 47k maximum input amplitude + 28dBu (19V rms) @ IGAIN = 0dB

Analog output (2 groups):

Frequency response: 20-20kHz /+-0.1dB

Signal to noise ratio: 130dB

Channel Crosstalk: -130dB @ 20-20kHz

THD + N: <0.00035% 20-22kHzBW @ 18dBu IN & 18dBu OUT

IMD (SMPTE): <0.0006% @ 18dBu IN & 18dBu OUT

Maximum undistorted output level: RCA output: 9.5V rms XLR output: + 28dBu (19V rms)

RCA output impedance: 100Ω XLR output impedance: 100Ω

Other parameters:

• Machine size: width 330 * depth 260 * height 65MM (excluding protruding parts);

• Packing size: length 420 * width 360 * height 175MM;

• Packing weight: 6.5KG;

• AC power: AC 115V / 230V 50 / 60Hz (manual adjustment);

• Overall power consumption: <20W;

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 17809246120

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 58 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
CMC20
Pawtucket, US
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
M
Mark Weinberg
Alexandria, US
★★★★★ 5
Stable, attractive, and easy to turn into a table with your choice of top
Size: side table leg
The X-shape of the table legs - constructed with solid metal flanges, T-joints, X-joints and 1-inch diameter pipes - provides a strong and sturdy base for a wood top. The legs have adjustable feet pads to prevent scratches and ensure stability. Assembly of the legs is relatively simple (the instructions are clear) but you will need your own tools to attach a top. The industrial design is especially well suited to rec room or finished basement use. I am adding a 28" diameter raw edge slab of wood from a recently felled tree as the top and it is very attractive. (Photo unavailable because after I made certain it would work I sent the slab out for drying and finishing.) If you want a custom table and have a particular piece of wood you want to use, these legs are an excellent choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
G
Grammar Guru
Dallas, US
★★★★★ 5
Very nice kit: Beware it is NOT heavy duty plumbing pipe though!
Size: side table leg
I want to give this kit a high rating, but I need to address the "truth in advertising" bit since there may be an important disconnect between what you think you are getting and what actually comes in the box. Black plumbing used for shelving or table legs is part of an important niche in interior design. I like the industrial loft look myself and have a variety of glass, steel, and masonry elements in my home. This kit fits that look and provides plenty of "strength" for most domestic uses, like shelves or coffee tables. But they are NOT "industrial pipe" or "maximum durability pipe." Note the phrase "cast iron finish feet," which together with the other claims might lead you to think these are cast plumbing fittings. They are NOT! The feet and flanges feel like electrical conduit fittings, and the pipe sections are likely aluminum. They might be electrical or they might be multi-use, lightweight pipe. While all this might lead you to think that you're getting a truly retro, heavy-duty pipe kit made of black plumbing pipe, you are not. But, does it matter? Depends. I find the lighter pipe's smooth finish a nice "tone-down" from the rough plumbing look. All together, this kit provides plenty of strength for most furniture and the rustic pipe look, but with a nicer, lighter finish. To me that is a plus--this is a very nice kit and costs less that if you'd pieced it together from real plumbing parts (I priced it out to compare), and looks retro but cleaner. I knew what to expect because while I got this kit free on Vine, I had purchased a nearly identical kit from another seller last year. So, I'm giving it 5 stars for what it actually is and for the price, JUST BE AWARE THE NARRATIVE IS MISLEADING. Which is unfortunate because just like some people might want the heavier pipe, I'm betting more would be attracted to the look with a cleaner, lighter feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2025
R
Verified Purchase
R
Battle Creek, US
★★★★★ 5
Strong legs, somewhat industrial but trendy also
Size: side table leg
Good legs, some what utilitarian or industrial, they are strong as they are made out of pipe, and assembly is fairly easy once you get the idea of how it goes together. They are roughly 1.5 feet across maybe a bit less adjustable height on each leg, if you have wood floors you may want to put a pad under each leg as they are full metal pipes. Pretty interesting idea and does not cost much.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
N
Verified Purchase
Nc
West Palm Beach, US
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026

recommand products