SKU: 74950844333

Happymodel CruxF405 HD AIO Flight Controller 3-4S 20A ESC-UART ELRS 2.4GHz- 20x20mm

Sale price$66.59 Regular price$73.99
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 13 - Jul 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Happymodel CruxF405 HD AIO Flight Controller 3-4S 20A ESC-UART ELRS 2.4GHz- 20x20mmThe CruxF405HD ELRS AIO flight controller comes with integrated UART 2. 4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre installed) which could support 3 4s battery. Bigger Mosfet could support high to 20A currents would be better for 3 4S toothpick drone or long range FPV drone. Reserved 6 pin socket for DJI HD equipment plug and play. Its a great solution of build HD digital FPV drone . No longer supports 2S, only 3S 4S. Check out

The CruxF405HD ELRS AIO flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-installed) which could support 3-4s battery. Bigger Mosfet could support high to 20A currents would be better for 3-4S toothpick drone or long range FPV drone. Reserved 6 pin socket for DJI HD equipment plug and play. It’s a great solution of build HD digital FPV drone .

No longer supports 2S, only 3S-4S.

Check out all our Flight Controllers and the rest of our HappyModel Products!

SPECIFICATIONS:

Flight controller

  • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
  • GYRO Sensor: ICM42688  (SPI connection)
  • Mount hole size: 20mm*20mm
  • Power supply: 3~4S battery input (DC 8.7V-17.4V)
  • Built-in 20A(each) Blheli_S 4in1 ESC
  • Built-in Serial ExpressLRS 2.4G (Default connected to UART2)
  • Built-in BMP280 Barometer
  • Built-in 8MBp blackbox
  • Built-in voltage meter sensor , voltage meter scale 110
  • Built-in current meter sensor , current meter scale 470
  • Flight controller firmware target: BETAFLIGHTF4

Onboard 4in1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 3-4S LiPo/LiPo HV (7v/17v)
  • Currents: 20A continuous peak 25A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: Bluejay 0.19.2
  • Firmware target: F_H_40_48_v0.19.2
  • Default protocol: DSHOT150/DSHOT300/DSHOT600

Onboard UART ExpressLRS 2.4GHz Receiver

  • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
  • RF Frequency: 2.4GHz
  • Antenna plug: IPEX
  • Telemetry output Power: <12dBm
  • Receiver protocol:  CRSF
  • Default firmware version: ExpressLRS V3.0.1

Onboard voltage and Amperage meters  settings

  • Voltage meter scale setting 110
  • Amperage meter scale setting 470

Binding procedure:

  1. Supply power to the flight controller by plug USB, wait until the red LED on the FC is off, immediately turn off the power, and then repeat again the above steps. When the FC is powered on for the third time, the red LED light will start to double-flash, which means that the Receiver enters the binding mode
  2. Please make sure your ExpressLRS tx module firmware is v3.x.x. And go to ExpressLRS.lua from “TOOLS” menu of your radio transmitter. Then hit [Bind] to binding with the onboard ExpressLRS receiver. The red LED should blinking slowly first then turn to solid, that means binding was successfully. If the red led keep tri-flash after binding ,please change Model Match tab value from “off” to “on” or from “on” to “off”

Receiver LED status meanings:

Red LED solid means bind successful or RC link established; Red LED double-flash means get into bind mode; Red LED flash slowly means no RC signal input from TX module; Red LED continuous flash fast means ExpressLRS wifi enabled; Red LED tri-flash means model mismatch need to change model match from “off” to “on”.

UART description:
ELRS receiver was connected to UART2 default out of factory.
Usually UART1 or UART6 Could be used for MSP OSD with HD VTX.
UART6 could be used for GPS or other serial equipment.
IRX6 is an inverted serial RX6 for SBUS input.
IRX6 and TX6/RX6 couldn’t be used at the same time.

NOTES:

If upgrade firmware to betaflight 4.4.x , need to add custom Defines “GYRO_SPI_ICM42688P ACC_SPI_ICM42688P” from build configuration of betaflight configurator otherwise gyro will not working . 

If you want to enable Barometer , please connect to betaflight configurator and go to CLI command ,then type the following command:

resource I2C_SCL 2 B10
resource I2C_SDA 2 B11
set baro_bustype = I2C
set baro_i2c_device = 2
save


Package Includes:

  • 1x Happymodel CruxF405 HD AIO Flight Controller 2-4S 20A ESC-UART ELRS 2.4GHz- 20x20mm


Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 74950844333

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1880 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Cat
Bozeman, US
★★★★★ 5
Nice room divider
Color: Colorful Landscape, Size: 6 Panel, Color: Colorful Landscape, Size: 6 Panel
I am pleased with this room divider. I was concerned that the art design might look blurry or cheap in person compared to online, but it doesn't. It looks really nice. In fact, I like it so much that I bought a second one as well. It arrived folded up - there is no assembly required - you simply unfold it and place it where you want. It's relatively light weight so it's easy to move. I also like that there is a different artwork design on each side. You have two choices; you can display whichever side you like more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
G
Verified Purchase
Gary C. Watkins
Pawtucket, US
★★★★★ 5
Beautiful!
Color: Mountains and Waters, Size: 3 Panel
Beautifully made and good structure. Looks very elegant.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
X
Verified Purchase
Xin Lu
Belleville, US
★★★★★ 1
May cause respiratory issues
Color: Mountains and Waters, Size: 4 Panel
The painting on this panel is beautiful and quality has held up BUT I’m almost certain this contributed to respiratory issues. It was next to my bed for a year and I recently noticed it’s still shedding red/brown dust. The wood was clearly painted over and it makes me skeptical about the wood that was used. The panel itself feels like it’s made cardboard. If you’re sensitive or plan to place this panel in a main living area, I would not recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 13, 2025
E
Verified Purchase
Elle Williams
West Palm Beach, US
★★★★★ 5
Ideal to hide stuff.
Color: Mountains and Waters, Size: 6 Panel
A really decorative pice for privacy, but I will also purchase the feet separately for sturdiness.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 25, 2026
G
Verified Purchase
Gail
Port Orchard, US
★★★★★ 4
Muted But Pretty!
Color: Mountains and Waters, Size: 3 Panel
Nice, sturdy 3-panel screen/room divider! However, could/should have been priced at $20-30 less. I like that it stands and folds easily, and there is not too much decoration or an exorbitant design. The colors are muted and would work well with many styles or color schemes. Personally, I wanted the wood frame to be a little lighter in color though.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 7, 2025

recommand products